Dodge 2013 SRT Viper Owner'S Manual Download Page 303

Page: 303 / 346

•

Check the fluid levels of the coolant reservoir, brake
master cylinder, power steering, and transmission, and
add as needed.

•

Check all lights and all other electrical items for correct
operation.

At Each Oil Change

•

Change the engine oil filter.

•

Inspect the exhaust system.

NOTE:

Also, inspect the exhaust system if you notice a

change in the sound of the exhaust system, or if the
exhaust fumes can be detected inside the vehicle.

•

Inspect the brake hoses.

•

Inspect the suspension components.

•

Lubricate door hinges and check springs.

•

Check the engine coolant level, hoses, and clamps.

•

Check power steering fluid level.

Required Maintenance Intervals

Refer to the Maintenance Schedules on the following
pages for the required maintenance intervals.

MAINTENANCE SCHEDULES

301

Summary of Contents for 2013 SRT Viper



























































































































































































































































































































































Search results

Summary of Contents for 2013 SRT Viper

Reviews:

Related manuals for 2013 SRT Viper

Brands by name

Popular brands

Dodge 2013 SRT Viper, Owner'S Manual

Search results

Summary of Contents for 2013 SRT Viper

Reviews:

Related manuals for 2013 SRT Viper

Brands by name

Popular brands