Dodge 2010 Nitro Owner'S Manual Download Page 102

Page: 102 / 474

Delete/Erase “All” uconnect™ Phonebook Entries

•

Press the

button to begin.

•

After the

⬙

Ready

⬙

prompt and the following beep, say

⬙

Phonebook Erase All.

⬙

•

The uconnect™ phone will ask you to verify that you
wish to delete all the entries from the phonebook.

•

After confirmation, the phonebook entries will be
deleted.

•

Note that only the phonebook in the current language
is deleted.

•

Automatic downloaded phonebook entries cannot be
deleted or edited.

List All Names in the uconnect™ Phonebook

•

Press the

button to begin.

•

After the

⬙

Ready

⬙

prompt and the following beep, say

⬙

Phonebook List Names.

⬙

•

The uconnect™ phone will play the names of all the
phonebook entries, including the downloaded phone-
book entries, if available.

•

To call one of the names in the list, press the
button during the playing of the desired name, and
say

⬙

Call.

⬙

NOTE:

The user can also exercise

⬙

Edit

⬙

Delete

⬙

operations at this point.

•

The uconnect™ phone will then prompt you as to the
number designation you wish to call.

•

The selected number will be dialed.

102

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2010 Nitro



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2010 Nitro

Reviews:

Related manuals for 2010 Nitro

Brands by name

Popular brands

Dodge 2010 Nitro, Owner'S Manual

Search results

Summary of Contents for 2010 Nitro

Reviews:

Related manuals for 2010 Nitro

Brands by name

Popular brands