Dodge 2010 Dakota, User Manual

Page: 13 / 76

• Child seatswith fixed lower attachments
must be installed in the outboard positions
only.
• Never install LATCH-compatible child seats
such that two seats share a common lower
anchorage.
• Loosen the adjusters on the lower straps
and tether straps so that you can attach the
hook or connector to the lower and tether
anchorages more easily.
• Attach the lower hooks or connectors over the top of the anchorage bars, pushing
aside the seat cover material. You will easily feel the anchorage bars if you run your
finger along the intersection of the seatback and seat cushion surfaces.
Tether Straps at the Rear Passenger Seat (Crew Cab)
• Route the child restraint tether strap over the seatback and under the head restraint
(for outboard seating position only) and through the anchor strap outer loop (webbing
material loop) located directly behind the child restraint.
• Connect the tether strap hook to the anchor
strap inner metal ring in the ADJACENT
seating position.
• Remove the slack in the tether strap so that
both anchor straps are pulled tight.
NOTE: Two anchors must be used for any of the three seating positions.
1 – Inner Anchor Strap Ring(s)
2 – Snap Hook
3 – Tether Strap
4 – Passenger's Side Rear Child Seat
5 – Rear Center Child Seat
6 – Driver's Side Rear Child Seat
11
GETTING STARTED