manualshive.com logo in svg

Dodge 2009 Charger SRT8, Owner'S Manual

The 2009 Dodge Charger SRT8 offers a thrilling driving experience like no other. With its powerful engine and sporty design, this sleek sedan is a dream for car enthusiasts. For all your queries and information, simply download the free Owner's Manual from manualshive.com, and explore everything this incredible vehicle has to offer.

Share
Download
background image

Flowing/Rising Water

WARNING!

Do not drive on, or cross, a road or a path where
water is flowing and/or rising (as in storm run-off).
Flowing water can wear away the road or path’s
surface and cause your vehicle to sink into deeper
water. Furthermore, flowing and/or rising water can
carry your vehicle away swiftly. Failure to follow this
warning may result in injuries that are serious or
fatal to you, your passengers, and others around you.

Shallow Standing Water

Although your vehicle is capable of driving through
shallow standing water, consider the following Caution
and Warning before doing so.

CAUTION!

•

Always check the depth of the standing water
before driving through it. Never drive through
standing water that is deeper than the bottom of
the tire rims mounted on the vehicle.

•

Determine the condition of the road or the path
that is under water, and if there are any obstacles
in the way, before driving through the standing
water.

•

Do not exceed 5 mph (8 km/h) when driving
through standing water. This will minimize wave
effects.

(Continued)

274

STARTING AND OPERATING

Summary of Contents for 2009 Charger SRT8




























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 Charger SRT8

Eaton Green Motion Building Quick Start Manual preview
Green Motion Building
Brand: Eaton Pages: 12
Feniex AM600 Instruction Manual preview
AM600
Brand: Feniex Pages: 6
Lancia THESIS CONNECT Owner'S Handbook Manual preview
THESIS CONNECT
Brand: Lancia Pages: 386
K&M 8494 Installation Manual preview
8494
Brand: K&M Pages: 3
Triumph MAYFLOWER 1951 Instruction Book preview
MAYFLOWER 1951
Brand: Triumph Pages: 86
Paxton Automotive Novi Owner'S Installation Manual preview
Novi
Brand: Paxton Automotive Pages: 85
Thule 1489 Instructions Manual preview
1489
Brand: Thule Pages: 8
Audi Q3 2015 - 2019 Technical Service Bulletin preview
Q3 2015 - 2019
Brand: Audi Pages: 12
IBASE Technology MPT-3000V User Manual preview
MPT-3000V
Brand: IBASE Technology Pages: 100
Modifry Products S2000 Windscreen Camera Mount Quick Start Manual preview
S2000 Windscreen Camera Mount
Brand: Modifry Products Pages: 2
Uebler X21 nano Mounting And Operating Instructions preview
X21 nano
Brand: Uebler Pages: 56
FALCON RIDGE HO-P500-FC04 Instructions For Installation And Care preview
HO-P500-FC04
Brand: FALCON RIDGE Pages: 8
Scosche 142HUD2 Manual preview
142HUD2
Brand: Scosche Pages: 8
Gator GHWCUSB2 User Manual preview
GHWCUSB2
Brand: Gator Pages: 8
benbat BM721 Instructions For Use Manual preview
BM721
Brand: benbat Pages: 14
SPL FE Z33 Installation Instructions preview
FE Z33
Brand: SPL Pages: 5
ULTIMATE SPEED 91449 Operation And Safety Notes preview
91449
Brand: ULTIMATE SPEED Pages: 34
Joie i-Level Instruction Manual preview
i-Level
Brand: Joie Pages: 53

Brands by name

Popular brands

Load more brands