Dodge 2008 Dakota Owner'S Manual Download Page 84

Page: 84 / 439

example, you can use the combined form voice com-
mand

Phonebook New Entry,

or you can break the

combined form command into two voice commands:

Phonebook

and

New Entry.

Please remember, the

UConnect

system works best when you talk in a

normal conversational tone, as if speaking to someone
sitting a few feet/meters away from you.

Voice Command Tree
Refer to “Voice Tree” in this section.

Help Command
If you need assistance at any prompt, or if you want to
know your options at any prompt, say

Help

following

the beep. The UConnect

system will play all the options

at any prompt if you ask for help.

To activate the UConnect

system from idle, simply press

the PHONE button and follow the audible prompts for
directions. All UConnect

system sessions begin with a

press of the PHONE button on the radio control head.

Cancel Command
At any prompt, after the beep, you can say

Cancel

and

you will be returned to the main menu. However, in a
few instances the system will take you back to the
previous menu.

Pair (Link) UConnect

System to a Cellular Phone

To begin using your UConnect

system, you must pair

your compatible Bluetooth

enabled cellular phone.

To complete the pairing process, you will need to refer-
ence your cellular phone owner’s manual. The
UConnect

website may also provide detailed instruc-

tions for pairing.

The following are general phone to UConnect

system

pairing instructions:

•

Press the PHONE button to begin.

•

After the

Ready

prompt and the following beep, say

Setup Phone Pairing.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2008 Dakota
























































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Dakota

Reviews:

Dodge 2008 Dakota, Owner'S Manual, Page: 84 / 439

Search results

Summary of Contents for 2008 Dakota

Reviews: