Dodge 2008 Dakota, Owner'S Manual, Page: 157 / 439

2. Unclip and remove the cables from the box while
maintaining a 45-degree angle.
3. Lift the tailgate off of the pivot on the passenger side
by pulling upward and rearward at the same time.
4. Slide the tailgate to the passenger side while making
sure clearance from the box and taillight is maintained.
To reinstall the tailgate, do the following:
1. Slide the tailgate onto the driver’s side pivot.
2. Hold the tailgate at a 45-degree angle and insert it into
the passenger side pivot.
3. Clip the cables to the box.
Two–Position Tailgate / Upper Load Platform
Your tailgate can be opened to the full-open or the
partial-open position. The partial-open position is for
loading objects longer than the length of the bed (sheets
of plywood, etc.) by creating an upper load platform:
1. Install lumber
•
Place lumber across the box in the indentations
provided above the wheel housings and in the
bulkhead dividers, to form the floor. There are
indents in the sheet metal (or bed liner if equipped)
on the inner side of the box in front (Club Cab
t
only) and behind both wheel housings.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE