6. Connect the other cable, first to the negative terminal
of the booster battery and
then to the engine ground (-)
of the vehicle with the discharged battery.
Make sure
you have a good contact on the engine ground. Refer to
the following illustration for jump-starting connections.
WARNING!
•
You should not try to start your vehicle by pushing
or towing.
•
Do not connect the cable to the negative post of the
discharged battery. The resulting electrical spark
could cause the battery to explode.
•
During cold weather when temperatures are be-
low the freezing point, electrolyte in a discharged
battery may freeze. Do not attempt jump-starting
because the battery could rupture or explode. The
battery temperature must be brought above the
freezing point before attempting jump-start.
7. Start the engine in the vehicle that has the booster
battery. Let the engine idle a few minutes. Then, start the
engine in the vehicle with the discharged battery.
Jump-Starting
340
WHAT TO DO IN EMERGENCIES
Summary of Contents for 2008 Charger SRT8
