Dodge 2008 Challenger SRT8, Owner'S Manual, Page: 83 / 385

To activate the UConnect
威
system from idle, simply press
the PHONE button and follow the audible prompts for
directions. All UConnect
威
system sessions begin with a
press of the PHONE button on the radio control head.
Cancel Command
At any prompt, after the beep, you can say
⬙
Cancel
⬙
and
you will be returned to the main menu. However, in a
few instances the system will take you back to the
previous menu.
Pair (Link) UConnect
威
System to a Cellular Phone
To begin using your UConnect
威
system, you must pair
your compatible Bluetooth
威
enabled cellular phone.
To complete the pairing process, you will need to refer-
ence your cellular phone Owner’s Manual. The
UConnect
威
website may also provide detailed instruc-
tions for pairing.
The following are general phone to UConnect
威
system
pairing instructions:
•
Press the PHONE button to begin.
•
After the
⬙
Ready
⬙
prompt and the following beep, say
⬙
Setup Phone Pairing.
⬙
•
When prompted, after the beep, say
⬙
Pair a Phone
⬙
and
follow the audible prompts.
•
You will be asked to say a four-digit Personal Identi-
fication Number (PIN), which you will later need to
enter into your cellular phone. You can enter any
four-digit PIN. You will not need to remember this PIN
after the initial pairing process.
•
For identification purposes, you will be prompted to
give the UConnect
威
system a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81
3