DODA Super 120, Use And Maintenance Manual

Page: 6 / 44

pg. 3
1) Check that no components of the pump have undergone damages during transporta-
tion. If damages have occurred, contact your DODA dealer immediately.
2) The connection to power supply must be carried out according to DODA instruc-
tions, by specialized staff (by connecting the cables of the electric motor to the in-
put or the pump to the tractor by means of the pto shaft). DODA is in no way re-
sponsible for any electric connection, (please follow instructions on the motor tag
as well as on the sticker showing the rotation direction).
3) Before starting the machine check that the rotary driving parts are adequately pro-
tected, as foreseen by their manufacturer.
4) If the protection of a rotary part is not an issue, it must be carried out by the opera-
tor in conformity with prevailing law.
5) DODA takes no responsibility for modifications altering the characteristics of the
machine bought.
6) Before operating the machine it is necessary to carefully read all directions in the
“ Instructions for Use and Maintenance” manual . In particular, be sure that you
have completely understood the machine operation.
7) The machine has been designed and built to treat water and sewage, not for
chemical products. Handling these substances can cause permanent damage to
this machine.
8) Check that the machine length is adequate to the depth of the tank.
9) In regards to machines with oil-bath drive, the driving pipe as well as the geared
units (if present) must be filled with oil prior to use.
10) Carefully avoid that machine rubber parts do not come into contact with oil,
grease or oil derivatives.
3. GENERAL WARNING