DOD S1+, Use Manual

Page: 12 / 54

11

Video Mode
1. Turn the power on, the camera is then started. The Camera mode appears on the screen,
then the symbol “
” appears at the top right corner, and the screen shows video information
and time displays at the bottom right corner. If the “ ” twinkles on the screen, it means it has
already got into the auto-recording mode.
2. Press “REC” button to start video recording and press it again to stop.
While video recording, red “ ” and timer will appear at the bottom of screen, and they will
disappear once it stops.
3. Infrared rays
When you take videos with your hand, you can press “Right” arrow key to open or close
infrared rays. If open infrared rays in nonluminous condition, you can see photos through
screen that cannot be seen due to darkness.
 Photo Mode
Turn the power on, the camera is then started. Press “MODE” button in video mode, then the
symbol “
” will appear at the top left corner, which means it has already got into photo
mode.
1. Aim the lens at the subjects and press Up or Down button to realize digital zoom, at this
time, hold on the camera tightly and do not shake it.
2. Press “REC” button, the camera give a crack sound, and then the photo is taken.
Shooting Method
Select “MENU” button in photo mode, then press “Down” to select “Shooting Method”, and
then press OK to select the “Continuous Shooting, Single Shot, 2s, 5s and 10s” for self-timer.
Notes ：
1. Press “MODE” in Video or Photo mode can switch to the other mode.
2. Press “MODE” Video or Photo mode can enter replay mode.