INPUT
,
OUTPUT
,
AND ALL
THOSE
FUNKY
BUTTONS
.
1
4
5
6
7
8
9
10
2
3
11
1. Program and bank selector footswitches These
footswitches provide access to the BASSTEC’s banks/programs.
2. Power adapter input This is where the DOD PS200R
power supply is connected. Use only the DOD PS200R, other
adapters will damage the BASSTEC, and void the warranty.
3. Mix/Wah/Volume/Sensitivity control input Connect optional
DOD VCC1 to have real time control over volume levels, wah
ranges, fx mix, and auto wah sensitivity.
4. Effect selector buttons These buttons allow you to select the
effects you wish to use or bypass.
5. Display The LED display in program mode shows which bank
and program is currently selected. In Edit mode it shows the
number and/or status of the selected effect. In Tuner mode it
displays the note currently being played.
6. Store Button Use this button to store your custom programs in
the user memory location of choice.
7. Up/Down buttons These buttons scroll up/down selected
effects (edit mode), or up/down through banks/presets
(performance mode).
8. Output Knob Controls the overall output level sent to your
amplifier input.
9. Clip LED The clip LED lights when clipping occurs at the input
of the BASSTEC, To eliminate clipping, reduce the setting of
your guitar level. Allow the LED to light occasionally with peak
signals.
10. Output jack Connect cable from this jack to your amplifier input,
also doubles as headphone output.
11. Input jack Plug in your instrument here.
BASSTEC OWNER’S MANUAL
MULTI EFFECTS PROCESSING
BT