Safety
The blue exclamation mark is an indication to the user about safety-relevant
facts and facts relevant to service in this manual.
The listed safety regulations should be carefully observed. Please observe the following
instructions and read this manual. For further questions please feel free to contact us.
We reserve the right to make changes to the design or specifications.
We reserve the right to make changes to the design or specifications.
We reserve the right to make changes to the design or specifications.
We reserve the right to make changes to the design or specifications. If you need help, if you have questions or if you have
a defect on the device, please contact us. We're here to help.
IMC5
3
© DOCtron 2021
1. Always use a properly grounded power cord for this product.
Please never remove the ground of the power plug. This connection ensures safe and quiet operation and
is absolutely necessary for operation.
2. When installing into a rack, be sure to provide adequate ventilation.
The top and bottom ventilation slots are not decoration and should never be covered during operation. The
main reason for technical defects are mostly heat problems. In non-ventilated cabinets, use ventilation
panels (1H) between units (even if they don't look very beautiful) to prevent heat build-up.
3. Avoid places with strong magnetic fields.
The housings of the device are designed to protect the sensitive electronics from EMI and RFI. For rack
mounting, be sure to place devices with large power supplies or power amplifiers as far away from the unit
as possible in the rack. A separate routing of signal and power lines can also help to suppress EMI and
RFI as much as possible.
4. Protect your device from moisture and water splashes.
If water has entered the housing, disconnect it immediately from the mains and send it to us for inspection
to prevent major damage.
5. If you feel unsure about having to open the device
to make settings, check fuses or set /
remove jumpers, please contact our support team. We're here to help.
6. Before you open the device
to change jumpers or make adjustments, be sure to
unplug
the power adapter before opening the case.
Disconnect the device from the mains! Make
sure that no foreign parts remain in the device after completion of the work.
