29
AT Commands
Overview
Parameters/Descriptions
Command
Examples
AT+CMEE=<n>
Set whether there is an
error report format of the
FOMA terminal.
n=0 : Use the normal ERROR
result (default).
n=1 : Use +CME
ERROR:<err> result
code, and use a
numerical value for
<err>.
n=2 : Use +CME
ERROR:<err> result
code, and use
characters for <err>.
AT+CMEE?
: Display the current setting
values.
The example on the right
shows the display when a
wrong PUK Code or PIN1/PIN2
Code was entered.
AT+CMEE=0
OK
AT+CPIN="123
45678","1234"
ERROR
AT+CMEE=1
OK
AT+CPIN="123
45678","1234"
+CME ERROR :
16
AT+CMEE=2
OK
AT+CPIN="123
45678","1234"
+CME ERROR :
incorrect password
AT+CNUM
Display the own number
of the FOMA terminal.
Result format:
+CNUM:,<number>,<type>
number : own number
type=129
: Show the number without the
international access code "+".
type=145
: Show the number with the
international access code "+".
AT+CNUM
+CNUM:,"090XX
XXXXXX",129
OK
AT+CPAS
Display whether the
control signals to the
FOMA terminal are
available.
Result format:
+ CPAS:<pas>
pas
0: Control signals can be
exchanged with the FOMA
terminal
AT+CPAS
+ CPAS:0
OK
AT+CPIN="<pin>"
[,"<newpin>"]
Enter the PIN code to the
FOMA terminal.
Enter the PIN1/PIN2/PUK
Code.
AT+CPIN?
: Display the status of the
PIN1 or PIN2 code. For the
result code, see P35.
* PIN can be authenticated
with AT+CPIN, however, it
will not appear on the FOMA
terminal. Be aware of this.
AT+CPIN?
+CPIN:SIM PIN
OK
("1234" is entered
for the PIN1 or
PIN2 Code.)
AT+CPIN="1234"
OK
("12345678" is
entered for the
PUK Code, and
"1234" for the
new PIN1 or PIN2
Code.)
AT+CPIN="123
45678","1234"
OK
Summary of Contents for style L-10C
Page 146: ...Kuten Code List for L 10C ...