Manual for PC Connection_DV85.fm
4
This section describes the preparation to use a packet communication and 64K data
communication. The flow is as shown below.
Use the broadband connection, etc. compatible “mopera U” (subscription necessary) for the convenient use of
Internet with the FOMA terminal. There is a plan that only charges for months which the service was used.
Flow of setup for data communication
Set USB mode of the FOMA terminal to [Communication mode] for data communication using USB connection.
Install the “FOMA communication configuration
file” (Driver)
Download and install “DOCOMO Connection
Manager” from the DOCOMO website
(
n
P. 14 to P. 18)
Set up a communication manually without using
“DOCOMO Connection Manager” (
n
P. 20)
Confirm installation (
n
P. 8)
Connect up PC to the FOMA terminal using
FOMA USB Cable with Charge Function 02 (sold
separately) (
n
P. 6)
Download and install the “FOMA communication
configuration file” (Driver) from the DOCOMO
website (
n
P. 7)
For USB connection
For Bluetooth connection
Connect the FOMA terminal wirelessly to your PC
using Bluetooth function (
n
P. 11)
Confirm the modem (
n
P. 12)
Connect (
n
P. 19, P. 28)
Set the FOMA terminal to access point mode
Refer to “Manual (detailed edition)” (in Japanese only) of the FOMA terminal for details on access point
mode
Connect the FOMA terminal wirelessly to your PC using Wi-Fi connection (
n
P. 13)
For Wi-Fi connection
Connect
Manual for PC Connection_DV85.fm 4 ページ ２０１１年５月９日 月曜日 午前１１時５９分
