79
e07_1_pr30.fm
[79/98]
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~~
~
~
~
Ot
her
s
When bringing the FOMA terminal in for repairs, be sure to bring the
warranty card. Even during the warranty period, a fee will be
charged for repairs of malfunctions or damage caused by your
improper handling (damage of LCD and connector), or when no
warranty certificate is presented.
Repairs for damages caused by the use of devices and accessories
other than those specified by DOCOMO will also incur a fee, even
during the warranty period.
Repairs may not be possible in the following circumstances.
When a repair counter considered water exposure (Example: When
the moisture detection seal has reacted)
As a result of inspection, when damage from water exposure,
condensation, sweat, or other liquids are found, or when the internal
circuit board is damaged or deformed (Repairs may not be possible
when external connector terminal (earphone/microphone terminal),
LCD, etc. is damaged, or when a housing is cracked)
※
Even when repairs are possible, repair charges will be incurred
because the warranty does not cover such damage.
After the warranty period has expired
Charged repairs will be carried out upon request.
Replacement parts
Replacement parts (required to maintain the functionality of the FOMA
terminal) will be kept in stock basically for 6 years following production.
However, note that there may be a case when repair is not possible for
the shortage of replacement parts depending on the faulty part.
IMPORTANT!
Never attempt to modify the FOMA terminal or its accessories.
Repairs may be refused depending on the extent of the modification.
The following cases may be considered as a modification.
• Stickers are applied to the LCD or keys
• Decorations are made to the FOMA terminal with adhesive agent
• Exterior parts are replaced with those which are not standard
DOCOMO product
Repairs for any malfunction or damage caused by such
modifications will incur fees, even during the warranty period.
Do not peel off the model nameplate attached to the FOMA terminal.
If the nameplate seal does not function as a certification, repairs may
be refused because conformity to the standards cannot be determined.
Information stored in your FOMA terminal, such as the settings of
various functions and the total call duration, may be cleared or reset
if your FOMA terminal is damaged, repaired, or mishandled.
If this occurs, please re-enter the information or re-specify the settings.
The following sections of the FOMA terminal contain parts that
generate magnetic waves. Keep ATM cards and other objects likely
to be affected by magnetic waves away from the FOMA terminal.
Cards may become unusable.
Sections: speaker, mouthpiece
If the FOMA terminal gets wet or becomes moist, immediately turn off
the power and remove the battery pack. Then, visit a repair counter.
The FOMA terminal may not be repaired depending on its condition.
※
The i-mode fault diagnosis site is only available in Japanese.
You can check whether the FOMA terminal can normally send and
receive mails, download images or melodies or perform other
operations. When a malfunction is found after checking, contact
the number listed in “Repairs” on the back of this manual.
Accessing the “i-mode fault diagnosis site”
i-mode site: [iMenu]
/
[
お知らせ
]
/
[
サービス・機能
]
/
[
ｉモード
]
/
[
ｉモード故障診断
]
Packet transmission charges are not incurred for the
i-mode fault diagnosis.
• Access from abroad is charged.
i-mode fault diagnosis site
技術基準適合認証品
QR code to
connect to
the site
pr30_e.book 79 ページ ２００９年１０月３０日 金曜日 午前１１時２６分
