18
2
Enter notify/not notify of caller ID in the format "AT
＊
DGPIR=<n>"
→
.
<n>
: 0-2
0
: Connect directly (Default)
1
: Connect prefixing 184 (Not notify)
2
: Connect prefixing 186 (Notify)
･
If nothing is displayed even when AT command is
entered, enter ATE1 and press
.
3
Confirm that "OK" is displayed and click "
ファイル
(File)"
→
Click "
ハイパー
ターミナルの終了
(End HyperTerminal)".
4
When confirming disconnection, click "
はい
(Yes)"
→
When confirming saving,
click "
いいえ
(No)".
❖
Show/Hide caller ID function by dialup network settings
The dialup network settings can also be used to append 186 (Notify)/184 (Not notify) to the dialup
connection number.
･
The Show/Hide of caller ID when both of the
＊
DGPIR command and dialup network settings are set is
as shown below.
◆
Setting dialup network
In this manual, the description takes the case of IP connection to mopera U via packet communication for
example.
･
When connecting to mopera U or mopera via packet communication, enter the following number in the
phone number field.
mopera U (PPP connection) :
＊
99
＊＊＊
2#
mopera U (IP connection) :
＊
99
＊＊＊
3#
128K communication (PPP connection) :
＊
99
＊＊＊
4#
mopera (PPP connection) :
＊
99
＊＊＊
1#
･
When connecting to mopera U or mopera via 64K data communication, enter the following number in
the phone number field to connect to.
mopera U :
＊
8701
mopera :
＊
9601
Setting made by
＊
DGPIR
Dialup network
setting (<cid>=3)
command
No setting
Caller ID is not sent
Caller ID is sent
＊
99
＊＊＊
3#
Caller ID is sent
Caller ID is not sent
Caller ID is sent
184
＊
99
＊＊＊
3#
Caller ID is not sent
186
＊
99
＊＊＊
3#
Caller ID is sent
