21
Intr
oduction
Draining Water
If you operate the FOMA terminal with water drops left adhered to,
the volume level from the speakers might be decreased or sound
quality vary.
Moisture may have entered inside through the clearance gap of the
keys or hinges.
Follow the procedures described below to wipe moisture off the FOMA
terminal:
①
Wipe completely moisture off the surface of the FOMA terminal
with a clean dry cloth.
②
Securely take hold of the FOMA terminal, and firmly swing each
surface at least 20 times until no moisture sprays off.
<Draining from earpiece>
<Draining from microphone>
<Draining from speaker>
③
Lightly push the FOMA terminal against a clean dry cloth, and
wipe moisture off the clearance gap of the microphone, earpiece,
speaker, keys, or hinges.
Do not directly wipe moisture out of joint gap using a cotton swab,
etc.
④
Remove the back cover and wipe off any drops of water around
the inner cover and the rear surface of the back cover, and then
attach the back cover.
Never open the inner cover.
See page 19 for how to remove the back cover.
Around inner cover
Rear surface of
back cover
⑤
Fully drain moisture and then operate the FOMA terminal.
Even when you follow the procedures for draining water as
described above, moisture might remain in the FOMA terminal.
Therefore, use the FOMA terminal after allowing it to dry out
naturally. Also, take care to keep any objects you do not want to
get wet away from the FOMA terminal since water may leak out
from the FOMA terminal.
Summary of Contents for P-06C
Page 1: ...P 06C INSTRUCTION MANUAL 11 7...
Page 158: ...Kuten Code List...