Docomo N-06B, Instruction Manual

Page: 39 / 158

37
Basic Oper
ation
PIN1 code and PIN2 code
■
At time of subscription : 0000
These codes are set to the UIM (FOMA card).
PIN1 code is a 4- to 8-digit number and must be entered every time you insert
the UIM (FOMA card) into the FOMA terminal or turn on the power.
PIN2 code is a 4- to 8-digit number that you enter when using or requesting
user certificates or performing tasks such as resetting total call charges.
If you enter an incorrect PIN1/PIN2 code three times in a row, the PIN1/PIN2
code is locked and cannot be used any more.
You can change the number.
i
s
"Settings"
s
"Lock/Security"
s
"PIN setting"
s
Enter your security code
s
"Change PIN1 code" or "Change PIN2 code"
s
Enter your current PIN code
s
Enter a new PIN code
s
Enter the new PIN code again to confirm.
・
To change your PIN1 code, select "ON" in "PIN1 code entry set".
・
You can set to display the PIN1 code entry screen when turning power on in
the following steps.
i s
"Settings"
s
"Lock/Security"
s
"PIN setting"
s
Enter your security code
s
"PIN1 code entry set"
s
"ON"
s
Enter PIN1 code
PIN Unlock code (PUK code)
The PIN Unlock code (PUK code) is an 8-digit number used to unlock PIN1 or PIN2.
It is written on application form (copy for customer) at time of subscription. The PIN
Unlock code (PUK code) cannot be changed.
・
If the wrong PIN Unlock code (PUK code) is entered ten times in a row, the
UIM (FOMA card) is then completely locked. In this case, contact a docomo
Shop Service Counter.