Docomo L-05A, Manual, Page: 89 / 116

Setting up
87
Windows Version
The L-05A connection software only need to be installed
when you connect the FOMA terminal to your PC for the
first time.
Preparation for Using L-05A
Setting Zero Installation (Auto)
■ For Windows Vista
a
Turn on PC and activate OS
b
Connect the FOMA terminal with a PC
The setup screen of L-05A connection software is
automatically displayed by zero installation.
"自動再生" screen will be displayed depending on setting. If
the screen is displayed, check "ソフトウェアとゲームに対しては
常に次の動作を行う" and select "Launcher.exeの実行"
np
※ When the Setting up screen of L-05A connection
software is not automatically displayed, install with the
included CD-ROM (P89)
Note
• When installing, insert FOMA terminal into USB port after
OS is activated.
• Take out the CD-ROM from CD driver when zero installation
starts.
• Do not remove the FOMA terminal while installing.
• Installation may take several minutes depending on the PC
you use.
• Do not install or uninstall during data communication.
•
End all the applications before installing. Also end
programs on Windows including virus check software.
•
When installing, make sure to install from the account with
PC supervisor privileges. An error will occur during
installation if you install from the account without these
privileges.
• For details on setting up PC supervisor privileges, contact
your computer manufacturer or Microsoft Corporation.