Docomo FOMA SA700IS, User Manual

Page: 215 / 565

212
i-
mod
e
1
Receive MessageR/F.
Blinks and / while receiving messages. blinks and or is lit when completing
receiving mails.
MessageR/F ring tone is played, and the number of received message is displayed with lighting/
blinking incoming call lamp.
•
Press
m
[Cancel] to cancel during receiving MessageR/F. MessageR/F may be received
depending on the receiving condition.
•
When folding FOMA terminals, the Receive status is displayed on Backside-display. P29
•
With no key operation for about 30 seconds after displaying Receive result, automatically returns
to the screen same as before receiving.
When receiving messages set to display automatically with no additional key operation, unread
MessageR/F contents are displayed before returning from Received result screen.
•
Under Multitask, Auto display is unavailable.
Displaying new MessageR/F
<ex> Displaying received MessageR
1
Press 2 "MessageR" on Receive result screen of Mail/Message.
2
Select MessageR.
•
Reading MessageR/F P214
INFORMATION
•
Press
3
"MessageF" to display MessageF.
•
The receiving screen and Receive result screen may not be displayed depending on Display priority. P274
•
When FOMA terminal receives a MessageR/F, the MessageR/F in the i-mode Center is deleted.
•
When enough storage space is not available for MessageR/F, or exceeding the maximum allowable numbers,
unprotected and already read MessageR/F are to be overwritten in chronological order from the oldest
message. Be sure to protect necessary MessageR/F to keep. P215
•
If no space is available to overwrite messages with full of storage area with unread MessageR/F and protected
MessageR/F, MessageR/F is canceled to receive and (orange) or (orange) is displayed on the screen.
P27
•
If MessageR/F remains in the i-mode Center, is displayed. Note that, icons may not appear even when
MessageR/F remains in some condition. (ex : when turning the power off or out of service area) Also the
number of stored messages ( P183) becomes full in the i-mode Center, (orange)
or
(orange) is
displayed.
•
When mails are failed to be received, receive mails again by Check new message.
Mail/Message
Reception status
screen
Ｒｅｔｒｉｖｅ ｍｅｓｓａｇｅ
Ｒｅｃｅｉｖｉｎｇ ｍｅｓｓａｇｅＲ
Ｃａｎｃｅｌ
Ｒｅｃｅｐｔｉｏｎ ｓｔａｔｕｓ
Ｍａｉｌ ０
ＭｅｓｓａｇｅＲ １
ＭｅｓｓａｇｅＦ ０
Ｍａｉｌ ０
ＭｅｓｓａｇｅＲ １
ＭｅｓｓａｇｅＦ ０