Docomo F960I, Instruction Manual, Page: 465 / 562

463
Appendix/External Devices/Troubleshooting
･
Access method to " ｉモード故障診断サイト " (In Japanese only)
iMenu
→お知らせ
(Notice)
→サービス・機能
(Services/Function)
→ｉモード
(i-
mode) →ｉモード故障診断 (i-mode fault diagnostic site)
* The access method may be changed without previous notice.
･
Packet communication for ｉモード故障診断 is free of charge. However when
accessing from overseas, you are charged for packet communications.
･
Test items vary by FOMA terminal models. And test items are subject to change.
･
Before checking operations using individual test items, carefully read the
precautions given in the site.
･
When connecting to ｉモード故障診断サイト or conducting message
transmission test, information specific to your FOMA terminal (model name,
mail address, etc.) is automatically sent to the server (i-mode fault diagnostic
server). DoCoMo does not use the received information for purposes except
ｉ
モード故障診断 .
･
When FOMA terminal is assumed to have malfunctions as the result of the
diagnosis, contact the phone number given in "Repairs" on the back of this
manual.
Software update
Software update
This function makes network connection to check for the necessity of updating
FOMA terminal software and, when necessary, downloads a part of the software
through packet communication
*
to update the software.
When software update is required, the information is posted in " お知らせ
(Notice)" on DoCoMo website or iMenu.
* Packet communication for software update is free of charge.
･
Software may be updated in the 3 methods below.
Automatic update : Download new software automatically, and overwrite at the
time specified in advance.
Immediate update : Updates on the spot as preferred.
Reserved update : Specifies the day and time-slot for automatic update of the
software in the specified day and time-slot.
✔
INFORMATION
･
Do not remove the battery pack while updating software. The update may fail.
･
Software update can be done even when various data, such as a phonebook
registered in FOMA terminal, camera images, downloaded data, are remaining; note
that data protection sometimes cannot be secured according to the conditions of your
FOMA terminal (such as malfunction, damage, or water leak). DoCoMo recommends
backing up necessary data. However some data such as downloaded data may not be
backed up.
･
Software update is available even when Host selection is other than "i-mode (UIM)".
･
Software update should be done with battery fully charged and enough battery power
(
→ P47).
･
Software cannot be updated in the cases below.
- When UIM is not inserted
- When the battery is not fully charged
- When the power is OFF
- When 圏外 (out of service area) is displayed
- When date and time are not set
- During a call
- While using other functions
- When PIN code is being entered
- When PIN is blocked
- In Omakase Lock
- In Self mode
- In Packet communication with a PC
- In 64K data communication
･
Software update (downloading or rewriting) may take time.
･
If software update is executed when PIN1 code ON/OFF is "ON", the PIN code entry
screen does not appear at the time of automatic reload after completion of software
updating.
･
Making/Receiving calls, communications functions and other functions are disabled
during software update. Only incoming voice calls can be answered while
downloading.
･
For software update, SSL session is established to the server (our site). Validate SSL
certificate from Manage certificate. It is set to valid by default.
→ P172
･
It is recommended that software update be executed in good radio wave conditions
with three bars of the antenna icon displayed (
→ P47) and the terminal not moved. If
radio wave conditions become weaker during software download or the download is
stopped, retry software update in a place with strong radio wave conditions.
QR code for
site access