Docomo F960I, Instruction Manual

Page: 414 / 562

412
Overseas use
PLMN setting
Setting a network to be connected by priority
You can set priority of a network to be connected when Network search mode is
"Auto".
1 m
[Settings & NW services]
9114
Listed from the one with the highest priority.
2
Place the cursor on the network and
m2
Displaying detail information : Select the network
Deleting an item : Place the cursor on a network and
m31 e
"Yes"
e C
Deleting selected items :
m32 e
Select
networks
e C e
"Yes"
e C
Deleting all items :
m33 e
Authenticate
e
"Yes"
e C
3
Select a priority level
e C
The telecommunications carrier moves to the selected priority with a different
level.
･
To give the lowest priority, select "<Insert last>".
◆
Adding networks to priority network list
･
Up to 20 items can be registered.
<Example> Adding a network not registered in FOMA terminal
1 m
[Settings & NW services]
9114
2 m11 e
Set the required items
e C
MCC : Enter the country code by 3 digits.
MNC : Enter the network number by 2-3 digits.
Selecting a network from a list registered in FOMA terminal :
m12 e
Select the country name
e
Select the network
Selecting a network from a list of those currently available :
m13 e
Place the cursor on the network and
C e
Go to Step 4
3 1
-
3 e C
4
Select a priority level
e C
The telecommunications carrier added to the selected priority with a different
level.
･
To give the lowest priority, select "<Insert last>".
3G/GSM setting
Switching networks
･
When setting to "AUTO", automatically connected to an available network even
when moving to a service area of a different type of network.
1 m
[Settings & NW services]
912 e 1
-
3
✔
INFORMATION
･
When setting to "AUTO", if both 3G and GSM/GPRS Networks are detected, 3G
Network takes precedence.
Area service status
Displaying current Area service status
1 m
[Settings & NW services]
766
The service state of the currently connected network is displayed.
･
You can use voice/videophone calls etc. by CS, and i-mode, i-mode mail,
etc. by PS.