Applications
79
･
Information displayed in the area of data broadcasting is
"data broadcasting" and "data broadcasting site"
information.
"Data broadcasting" information is carried in a broadcast,
together with images, voice and sound, and "data
broadcasting site" information is used to access sites
provided by the TV broadcaster (broadcast station).
Packet communication charge is applied when accessing a
site such as a "data broadcasting site" or others.
Some sites require information charges to be used.
◆
About signal
Full Seg/1Seg is one of the broadcasting services, and the
receiving signal (broadcast) differs from that of the Xi/FOMA
service. For this reason, the signal cannot be received at places
where the broadcast does not reach or while broadcasting is
out of service, regardless of whether the terminal is outside or
inside the Xi/FOMA service area.
Also, in the following places, the signal status may become
weak or the signal may not be received even if the terminal is
inside the area of a terrestrial TV broadcasting service.
･
Places that are far from the broadcast transmission tower
･
Places where the signal is disrupted due to the landscaper or
structures such as mountain areas or behind buildings
･
Places where the signal is weak or does not reach, such as
tunnels, basements, or places inside buildings
Extend the TV antenna fully, and turn the antenna around or
move to other place. Signal reception may be improved.
■
TV antenna
TV antenna receives broadcasting signals when you watch TV
(Full Seg/1Seg).
･
Make sure to extend the TV antenna to the end when pulling
it out.
･
To turn the TV antenna around, hold the part near the base
of the TV antenna. Do not put an excessive force.
･
To stow the TV antenna, hold the part near the base of the
TV antenna and insert it until it stops. Do not hold the top
end to stow.
✔
INFORMATION
･
You can use the optional USB coaxial conversion cable F01.
To use it, connect it to the external connection jack on the
terminal. For details on how to connect, refer to the operation
manual of the optional USB coaxial conversion cable F01.
･
When you use the optional USB coaxial conversion cable F01,
set Receiving antenna setting to "TV antenna cable".
