20
Ba
si
c O
p
e
ra
tio
n
Before Using
Operating in separated style
To operate from the keypad unit in separated style, the keypad unit
should be registered as a Bluetooth device. Registration is
automatically performed when you joined the FOMA terminal and
turns it ON for the first time.
*
For detaching/attaching FOMA terminal's unit, hold the FOMA terminal
in hand.
✜
Detaching
Press separating button (
a
) and hold the display unit up (
b
).
When the terminal is separated, the arch light blinks and start a
Bluetooth connection between the display unit and the keypad unit
automatically.
It takes approximately 4-5 seconds for using the keypad unit (except
for when separating while calling and when Action when detached is
set to "Always connected"). When the Bluetooth connection is
completed, or
appears on the display and the Bluetooth light of
the keypad unit blinks.
✜
Attaching
Join the units with fitting convex part of the
keypad unit and concave part of the display
unit (
a
) and push until the separating button clicks to fix them (
b
).
The arch light blinks when the units are attached, and after a while, the
Bluetooth connection is disconnected.
Point
・
To operate FOMA terminal with the keypad unit, turn the power of both
units ON. If the power of keypad unit is turned off or the unit is not
recognized as a Bluetooth device, Bluetooth connection does not start
when separating FOMA terminal.
・
In separated style, by turning power OFF of the display unit, some lock
functions, software update, etc., the power of the keypad unit turns OFF
automatically and the Bluetooth connection stops. For using the keypad
unit in separated style again, turn the display unit ON or cancel the lock,
then once join the FOMA terminal.
・
If the units are attached when power ON/OFF status of each unit differ, the
keypad unit status is switched to the one of display unit.
Separating button
Convex part of keypad unit
Concave part of display unit