21
Setting communications without using DOCOMO
Connection Manager
The method of dialup connection setup without DOCOMO Connection Manager is explained.
I
When using an access point compatible with HIGH-SPEED such as mopera for packet communication,
make settings using DOCOMO Connection Manager.
Flow of dialup network setting
I
Flow of setup for data communication
→
P5
I
Before operating, make sure that a PC and FOMA terminal are properly connected.
*
Set for packet communication.
Communication software to input AT commands is required for settings.
The method of setting using "
ハイパーターミナル
(HyperTerminal)" that comes with Windows 2000 and Windows XP
is explained here. Windows Vista and Windows 7 do not support "
ハイパーターミナル
(HyperTerminal)". For Windows
Vista and Windows 7, set using the software supported by Each OS (Follow the method for the software to be used.).
Setting the dialup connection (APN)
The dialup connection (APN) and registration number (cid)
The dialup connections (APN) for packet communication can be set for registration numbers (cid) between
1 and 10 in FOMA terminal. "mopera.ne.jp" (APN) to connect to mopera is registered in cid1 and
"mopera.net" (APN) to connect to mopera U is registered in cid3 by default. For connecting to other
providers or corporate LANs, register APN for cid2 or 4-10.
I
For the dialup connections (APN), inquire your provider or network administrator.
I
For USB cable connection and Bluetooth connection, setting each dialup connections (APN) is required.
I
For packet communication, if switching between USB cable connection and Bluetooth connection,
setting the dialup connections (APN) is required again.
I
The dialup connection settings can be considered as phonebook entries registered for packet
communication. The comparison between dialup connection settings and FOMA terminal phonebook is
as shown below.
I
The registered cid become the connection number in the dialup connection numbers setting.
Dialup connection settings
FOMA terminal phonebook entries
Registration number (cid)
Registration number (Phonebook No.)
APN
Party's phone number
Setting the dialup connection (APN)
*
→
P21
･
When the access point is mopera U or mopera, you do not need to set.
Setting Show/Hide caller ID
*
→
P23
･
Set as required.
Setting Dialup Network
･
Setting for Windows Vista, Windows 7
→
P24
･
Setting for Windows XP
→
P27
･
Setting for Windows 2000
→
P29