![Docomo Aquos Phone F SH-13C Instruction Manual Download Page 131](http://html1.mh-extra.com/html/docomo/aquos-phone-f-sh-13c/aquos-phone-f-sh-13c_instruction-manual_2515140131.webp)
129
Appendix/Index
ɡ
Calling
Battery pack is a consumable product.
Service time per charge is gradually
reduced every time the battery is
charged.
Purchase a specified new battery pack
if the usage time becomes extremely
shorter than when the battery was
purchased even after fully charged.
P. 34
Power turns off/The FOMA terminal restarts
Unclean terminals for the battery pack
may result in poor connections and loss
of power. Wipe with a dry cloth or a
cotton swab.
–
Not activated by touching, pressing keys, etc.
Make sure the FOMA terminal is not
turned off.
P. 38
Screen response is slow when touching,
pressing keys, etc.
This may happen when a great deal of
data is saved in the FOMA terminal or
when a large amount of data is
transferred between the FOMA terminal
and the microSD Card.
P. 82
miniUIM does not recognize
Is a miniUIM inserted facing right
direction?
P. 30
Clock is incorrect
Clock may become incorrect if the power
is turned on for a long time.
Make sure the setting is set to adjust time
automatically and turn the power on again
in a location with good signal conditions.
P. 84
Calls cannot be made by touching, pressing
keys, etc.
Make sure Restrict calls of Lock Setting
is not set.
P. 80
Make sure Offline mode is not set.
P. 76
Ring tone does not sound
Make sure phone ring volume is not set
to [0].
P. 78
Make sure Public mode, Manner mode
or Offline mode is not activated.
P. 74
P. 76
P. 78
Make sure Call blocking is not set.
P. 77
Make sure ringing time for Voice Mail
Service or Call Forwarding Service is
not set to “0 seconds”.
P. 70
P. 72
Connection cannot be made ([
(
] does not
disappear even after moving to another place
or calls cannot be made/received even though
signal status is not bad)
Turn the power on again or attach the
battery pack or miniUIM again.
P. 30
P. 32
P. 38
Depending on the signal type, even
though status is “inside the service
area” or “[
!
] (indicating signal status)
appears”, making/receiving a call may
not be available. Move to another place
and call again.
–
Make sure the call restriction such as
Call blocking, etc. is not set.
P. 77