Doco SRR-70, Installation Manual

Page: 4 / 40

4
5. Guidelines
DOCO International had carried out the “Product Test“ of this door (Initial Type Testing = ITT) by the SP institute in Sweden, known as Noti
-
fied Body No. 0402.
Documents regarding this ITTr can, in consultation with DOCO, be transferred to the company which produces the door. This is necessary to
complete a CE-dossier.
NOTE: CE-approved only using the correct DOCO-components.
It is the responsibility of the installation company to ensure that the chosen E-operator and panels conform to the product standard EN13241-1
and have carried out the necessary ITTr.
If a wicket door is to be installed, it is the responsibility of the installation company to ensure that the complete door conforms to the product
standard EN13241-1 and have carried out the necessary ITTr.
6. Fixing material building
The necessary fixings to ensure the garage door to the building and/or ceiling, are not included!
It is the responsibility of the installer to make sure that the building structure is safe/strong enough, to accept the door and its fixings.
The installer is also responsible for using the correct fixing materials on the right foundation (stone, concrete, steel, wood).
In the image section there will be therefore no specification included.
7. System overview 7. System overview
Structural depth = OH + 640
OW
T
rack height = H - 45
Fr
ee opening height = H - 70
H = Opening Height Daylight
OW = Opening Width Daylight