Table of Contents
Page
“The DockSider”
TM
o
Safeguards
2
o
Warranty
3
o
Part List
3
o
Assembly Instructions
4
o
Dock Mount Installation
5
o
Installation- DS 400 and WS 400 Cradle Assembly 6
o
Setup
8
o
Operation
10
IMPORTANT SAFEGUARDS
1.
READ ALL INSTRUCTIONS BEFORE USING THE
“The DockSider”
TM
.
2.
The intended use of the product is to store a kayak or paddleboard on the side of a boat
dock. Do not use this product for other than its intended use.
3.
The maximum weight of Kayak or paddleboard to be racked in
“The Docksider”
TM
shall
not exceed 100 pounds.
4.
“The Docksider”
TM
is not intended for Salt Water applications; exception is the
Stainless Steel model.
5.
Kayaks
should not
contain more than one quarter inch (1/4”) of water inside when
storing in the
“The DockSider”
TM
. Product Damage could result to the
“The
DockSi
der”
TM
, if this is not followed the Warranty will be voided. If your Kayak
contains excess amounts of water (capsized or other), roll kayak over to empty.
6.
To ensure proper use, do not attempt to modify this product in any manner. Please refer
to the manual if questions arise.
7.
If further assistance is needed, please contact DockCraft Industries prior to use.
8.
Do not allow children or adults to lean on, play on, around, or with the
“The
DockSider”
TM
while a Kayak or Paddleboard is loaded or unloaded. Serious injury
or damage to product, docks, and people could result if this warning is not followed.
9.
Store only one kayak per
“The DockSider”
TM
.
10.
If the DockSider is not working properly, please contact DockCraft Industries
immediately for assistance.
11. Do not enter or exit your Kayak / Paddleboard when your kayak is engaged within
“The DockSider”
; in the loading or storage position.
12. Do not install your Kayak / Paddleboard Storage Rack such that
“The DockSider”
is near
or in contact with any electrical or Dock Structural components.
Page 2 of 11
