background image

10 of 11 

 

it unsafe for use. Clean burner holes by using a heavy duty pipe cleaner. Compressed air may help clear away 

smaller particles. 

  Carbon deposits may create a fire hazard. If any carbon deposits develop, clean dome and engine with warm 

soapy water. 

 

After the burner and lava rocks are completely cooled down, remove it from the bowl and use a soft brush to get rid 

of the mild stains, loose dirt and soil. Wipe with a soft cloth.

 

 

Clean the bowl and afterward put lava rocks again in proper position.

 

 

For proper cleaning, a vacuum cleaner can be used. 

 

 

Note: In a salt-air environment (such as near the sea), corrosion occurs more quickly than normal. 

Frequently check the corroded areas and repair them promptly. 

Stubborn stains, discoloration and 

possibly rust pitting can occur from exposure to harsh outdoor conditions. Be careful not let any powder 

or solvent come in contact with painted or plastic components as damage may occur. 

After long use, some discoloration can come up and it screen is normal. 

Make sure both gas supplies is in OFF position before changing battery. Please refer to the process of assembling 

battery. 

Please contact the Manufacturer or dealer for information regarding replacement hoses, thermocouples, igniters, 

lava rocks, etc. 

 

Attention: Never use unauthorized parts or component for this appliance. 

Use only original equipment replacement spare parts and components.

 

Otherwise may void the warranty of this product and result in a hazardous condition. 

 
 

STORAGE (after use) 

Turn control knob in “OFF” position (full disk). 

Turn LPG cylinder in “OFF” position. 

Store the appliance in a cool dry place away from direct sunlight; s

tore it upright in an area sheltered from direct 

contact with inclement weather (such as rain, sleet, hail, snow, dust and debris). 

If desired, cover to protect exterior surfaces and to prevent build up in air passages. 

Note: Wait until appliance is cool before covering. 

 

During periods of extended inactivity or when transporting: 

Turn control knob in “OFF” position (full disk). 

Disconnect LPG cylinder and move to a secure, well ventilated location outdoors. DO NOT store in a location that 

will exceed 50 °C. 

Store appliance upright in an area sheltered from direct contact with inclement weather (such as rain, sleet, hail, 

snow, dust and debris). 

If desired, cover appliance to protect exterior surfaces and to prevent build up in air passages. 

Note: Wait until appliance is cool before covering. 

 
 

Summary of Contents for 35441E












Reviews: