DS-320SA
Instruction Manual
- 18 -
www.doallsaws.com
5.6
SAFETY REGULATIONS
The machine has revolving and moving parts that could hurt you. So it is necessary that there is only one
operator who works in the working area of the machine. It is the operator's responsibility to keep others out
of the work zone.
WARNING: It is the employer's
responsibility to mark the machine
safe zone using, for example, black
and yellow striped tape on the floor. It
is necessary to keep this marking
legible.
That is why it is necessary for the
operator to stay behind the protective line
during cutting ( cutting, it means that
blade moves ). The protective line is
determined by the area in front of control
panel
Machine surroundings
– contour line copying the ground plan
with 6 ft space gap
pic: 5-1
WARNING:
If the jaw of vice moves, you can not
leave your place in front of the controlling terminal before
you press the button to stop jaws movement.
pic: 5-2
WARNING:
The beam of the movable guide could
collide with the material to be cut. Exercise extreme care
when moving the arm near the movable guide.
pic: 5-3
WARNING:
Before adjusting the machine or its
parts, turn off the main switch and lock it using a padlock.
(The padlock prevents others from turning the machine
on during maintenance.)
pic: 5-4
