Segatrici
S.r.l
Instruction Manual
Pag.24
Edition A
12.1.8 Multi-length programs
If a cutting program has more than a length (the operator inputted from 2 up to 10 lines), the saw will operate as follow
•
the machine cuts all the pieces included in the first line of program ;
•
when at the last piece of the first line, the index will move to the length set in the second program line ;
•
when the machine has to cut the last part of the last line, the index will move to zero.
12.2. C
ALIBRATION
No calibration is needed, because the machine was calibrated by the manufacturer.
12.3. M
ACHINE TUNING
-
UP
No tuning-up is needed, because the machine was tuned-up by the manufacturer.
13 HOW TO DISMANTLE THE MACHINE
Only experts can dismantle the machine.
