Segatrici
S.r.l
Instruction Manual
Pag.21
Edition A
12.1.5 Editing
When the machine is on, the NC display shows the edit screen, that looks like to what follows :
DoALL - SEGATRICI
PROG.N. 001
NEXT 001
CYCLE 00001
TOT.00000
BLADE SP. 060
PRES. 000
LENGHT
CUTS
TOT.
1 00000.0
00000
00000
2
00000.0
00000
00000
3 00000.0
00000
00000
4 00000.0
00000
00000
5 00000.0
00000
00000
6 00000.0
00000
00000
7 00000.0
00000
00000
8 00000.0
00000
00000
9 00000.0
00000
00000
10 00000.0
00000
00000
There is a hand cursor pointing to :
PROG N.001
which is the current program ready to be executed.
Let’s see how to make your own cutting program. For the first times the operator will program the saw, we suggest to follow exactly these instructions :
1.
using the NC keyboard, type the number of program (between 1 and 99) you want to program, and then press the E (Enter) key. For example, type
001 E.
2.
If the program 001 is already stored into the NC memory, it will appear on the screen. If it is not into the memory, or you want to replace/correct it,
continue to insert the data as follow.
3.
The hand cursor is now pointing to Next 001.
4.
If the machine uses multiple bars (when there is a conveying system) type in this space the program that the machine has to do when finished the
001. If no conveying systems are provided along with the machine, type the same program number (if the current program is the 001, then type
001).
5.
Press the E button to enter your choice. The cursor is now on Cycle, and it is therefore necessary to type the number of time we want to perform
program 001. When typed, press E. If there is a conveying system, type the number of bars you are going to cut.
6.
The Tot line gives the operator the number of cycles the machine has already done. Type 0, then press E.
7.
It is necessary also to set the blade speed. The variable depends on the material you are trying to cut : please, make reference to the attached exhibit
when possible, otherwise call the manufacturer. The blade speed range goes from 0 up to 100 meters per minute ; type the right value and then
press E.
8.
As optional for the machine, the operator can control from the NC the head feed rate modifying the PRESS (included between 0 and 100) If the
value is correct, move down pressing
↓
.
