Operation Manual
VacuDAP 2002
2002BA01e.DOC / 22.07.2004
10
of
22
3.2.2 Display units, connections and control elements
Display units can be supplied with different housings; see
Table 2
.
The following connections are found on the rear sides of the units:
•
Input: voltage supply (plug-in power pack)
•
Input (4-pole socket): measuring signal from the detector electronics
•
Output (5-pole socket): serial interface RS-232 (for printer or PC)
The measured values (in mGy*cm²) are displayed by a high-intensity, 8-digit LED display. The readout
resolution is 1 mGy*cm.
The measuring system is operated by using the two keys
and
Reset
on the keypad.
Built-in unit 952 00 02
•
for incorporation in operator consoles
•
sturdy, compact housing
•
RS-232 for printer or PC
Table-top unit 953 00 01
•
standard unit
•
compact housing
•
RS-232 for printer or PC
•
alternatively, as wall-mounted unit (953 00 02)
Table-top unit 956 00 01
•
for 2-channel measuring system
•
simultaneous, independent measurements
•
compact housing
•
common RS-232 for printer or PC
Table 2: Display units
