DNT FunTastic Easy, Owner'S Manual

Page: 33 / 48

- 32 -
English
- 33 -
English
General operation
Hold
To protect the keys against unintentional settings, set
the
HOLD switch into the ON position. In this case the
recorder keeps the function that was selected before.
By pushing any key during the HOLD- mode the
display will show and the icon.
Erase all / Reset
With this function you can set the FunTastic Easy into the original condi-
tions, all data stored on the FunTastic Easy Data will be erased.
Press the
ERASE
button and the
REC/STOP
button at
the same time (more than 4 sec.) until the
flashes on the display (meanwhile is flash-
ing). To erase the files, finally press the ERASE button
again (during is flashing). To cancel the erase
mode, press any other button.
Auto-Off when not in use
If for more then 1 minute the unit is not in use, it switches off automati-
cally.