English
- 36 -
Software
Image editing
Focus the microscope on the attached calibration ruler and adjust the
magnifi cation till the picture is clear. Take a picture for the selected area
when the dial is parallel to the crossing as below .
Double-click on the picture to enter into
measurement interface as below.
Click the
Calibration
icon , and then move the
mouse to the picture. Click on the beginning
and ending points across a known value. Now
a dialog will popup as below and you need
to enter the exact value of the measurement
sample into ‘Actual dimension’.
The software will automatically calibrate the
magnifi cation rate. Click ‘OK’ and the adjusted
magnifi cation rate will show in the upper right
corner.
Menu bar
store image
copy image to clipboard
copy image
last image, next image
undo, redo
DM pHDMI.indd 36
DM pHDMI.indd 36
04.08.2016 10:42:41
04.08.2016 10:42:41
