manualshive.com logo in svg

DNP DS-SL10, Operating Instructions Manual

Share
Download
DNP DS-SL10 Operating Instructions Manual Download Page 46

46

Cleaning

  Chapt

er 5  Maint

e

n

anc

e

5

Open the side door, and remove the ink ribbon 
cartridge.

6

Load the cleaning cartridge into the printer, and close 
the side door.

7

Touch the [OK] button in the message.

About 30 cm of print paper emerges, and a message 
asking for confirmation to begin cleaning appears on 
the screen.

8

Remove the paper from the back side of the cleaning 
sheet (the side without an illustration).

Be careful not to confuse the back and front sides of 
the cleaning sheet.

9

Determine by the width of the print paper the 
orientation to affix the cleaning sheet, and affix the 
cleaning sheet evenly and squarely onto the ejected 
paper as illustrated.

When using the 2UPC-C14/C48 series printing pack, 
orient the cleaning sheet lengthwise rather than 
crosswise.
Firmly affix the entire cleaning sheet so that the 
corners do not peel up and the center is not raised. If 
the corners of the cleaning sheet peel up, cleaning may 
not be performed properly.

10

Remove the paper from the front side of the cleaning 
sheet.

11

The adhesive surface of the cleaning sheet is exposed 
now, so check again to make sure that none of the 
corners have peeled up and the center has not been 
raised.

12

Touch the OK button in the confirmation message.

Cleaning begins. The print paper is drawn into and 
then reemerges from the eject slot, which removes any 
foreign particles and grime inside the printer.
When cleaning finishes, the print paper is cut several 
times.

After cleaning is finished, make sure the cleaning 
sheet is completely ejected. If any part of the cleaning 
sheet remains on the print paper, remove the paper 
holder and cut off all the remainders before using the 
printer.

Note

2UPC-C14/C48 series

2UPC-C13/C15 series

Summary of Contents for DS-SL10












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands