DNIPRO M EN-25, Operating Manual

Page: 18 / 32

Electric stapler
14
ENG
recommendation is not followed, warranty maintenance is not provided. In addition, such
operation may result in an accident.
It is prohibited to:
1. Operate and store the machine in premises with explosive or chemically aggressive
media that corrode metals and insulation.
2. Operate the tool under the influence of moisture (rain, snow, etc.).
3. Leave unsupervised machine connected to electric mains.
4. Operate the machine if at least one of the following failures takes place:
• damage of mains plug or cable;
• switch malfunction or fuzzy operation;
• smoke or smell appears characteristic for insulation ignition;
• breakage or cracks creation in body parts.
Keep the product in good repair. In case of malfunction, occurrence of smell
specific to burnt isolation, severe knocks, noise, sparks, you must immediately
stop work and contact Dnipro-M service centre.
This manual cannot take into account all cases that may occur under real
operating conditions. Therefore, you must keep common sense and be very
attentive and careful during the operation of this machine.
4. TECHNICAL DATA
Model ES-16 EN-25
Peak pulse power, W 1000 1200
Voltage / frequency, V / Hz 230/50 230/50
Maximum speed of shots, min-1 20 20
Type of staple, mm Type 53 Type 90
Staple length, mm
8-16 15-25
Staple width, mm 11.3 5.7
Type of nail, mm Type F Type F
Nail length, mm
15-16 15, 20, 25, 30, 32
Nail diameter, mm 2 2
IP Class IP20 IP20
Net/gross weight, kg 1.3/1.5 1.9/2.2