DNF Controls 4000CL-MAV-PBIO User Manual Download Page 15

15

 

 

 

 

4000CL-MAV, 250 Clip Fast Access System,  for Sony MAV-555, with PBIO option

Reference . . .

15. SETUP MENU

Press [

MENU

].  The MENU indicator will turn on.

Turn the Wheel to select item to change.

Press [

MENU

] OR use the Softkeys to change the desired mode for that option.

Turn the Wheel at anytime to select another item.

Press [

ESC

] at anytime to exit SETUP MENU.  The MENU indicator will turn off.

MENU MODES

(Turning Wheel Clockwise)

RECORD

Press [

MENU

] to select the desired record mode: Lockout, Crash (Full).

WIND MODE

Press Softkey to select:
HOLD (Fast wind is maintained only while key is depressed.)

OR

LATCH (Fast wind is initiated and maintained with momentary key press.)

Select fast wind speed (3.9 to 23.7) by pressing Softkey below SPD.

SLOMO

ST300 display shows:
(Non T-Bar version)

ST300 display shows:
(T-Bar version)

NOTE 

- The T-BAR has a fixed speed range of 0 

Æ

 +200 with a detent at

+100 % play speed.

Press Softkey [

TBAR

] (or [

WHEEL

]) to toggle between them.

For Wheel only:

Press Softkey [

SPDRANGE

] to select SLOMO speed ranges.

Press Softkey to select: 0 

Æ

 +200 

OR

 -100 

Æ

 +200.

Press Softkey [

BACK

] to return to SLOMO MENU.

Press [

ESC

] to exit 

OR 

turn the Wheel to select another item.

For Wheel only:

Press Softkey [

PRSET

] to select the SLOMO Preset Speed Mode.

Press Softkey [

UPDATE

].  When exiting SLOMO mode, the last used speed is

saved in the Preset Speed register.

Press Softkey [

STATIC

].  The Preset Speed register is NOT updated when

exiting SLOMO mode.  It is only changed by [

SHIFT

] + [

SLOMO

] (PRESET

SLOMO).

SLOMO with:

         TBAR

Wheel        SpdRange

          Preset

SLOMO with:

         WHEEL

SpdRange

          Preset

Summary of Contents for 4000CL-MAV-PBIO





















Reviews: