15
4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol
13. FUNCTION
TABLE
Function
Key Press
Description
ENTER
RECORD
LENGTH
[
SHIFT
] +
[
RECORD
]
Enter the desired record length using the numeric keypad.
Press [
ENTER
] to accept.
FFWD
[
FFWD
]
Press and HOLD to shuttle. Release key to stop. Set WIND Speed in MENU.
GANG
[
SHIFT
] + [
VTR #1
]
OR
[
SHIFT
] + [
VTR #2
]
OR
[
SHIFT
] + [
VTR #3
]
OR
[
SHIFT
] + [
VTR #4
]
Individually press the VTR keys to be included in the gang; the LED above the
key will turn on. Press the VTR key again to remove from gang; the LED
above the key will turn off. Press [
ESC
] to exit.
The VTR LEDs that are on show the gang.
The flashing LED shows which VTR is currently selected.
GO TO
ENTERED
TIME
[
SHIFT
] + [
RECUE
]
Enter the desired recue time using the numeric keypad.
Press [
ENTER
] or [
RECUE
] to reload the currently loaded clip at the entered
time.
JOG [
JOG
]
Select JOG mode and enable Wheel.
LAST CUE
[
LAST
CUE
]
Step to the previous Cue Point Location.
NEXT CUE
[
NEXT CUE
]
Step to the next Cue Point Location.
RECORD
[
REC
]
Places VTR into the Record mode selected by RECORD MODE in the SETUP
MENU. Press [
RECORD
] or [
RECORD
] + [
PLAY
].
REWIND [
RWD
]
Press and HOLD to shuttle. Release key to stop. Set WIND Speed in MENU.
SHUTTLE [
SHUTTLE
]
Select SHUTTLE mode and enable Wheel.
SLOMO [
SLOMO
] Press
[
SLOMO
] to slo-mo the VTR. Turn the Wheel to change the play speed.
Press [
SLOMO
] to STILL the frame.
OR
Press any transport key to exit SLOMO.
SLO-MO
SPEED
PRESET
[
SHIFT
] +
[
SLOMO
] For
WHEEL
ONLY
: Press [
SHIFT
] + [
SLOMO
] to preset the slo-mo speed.
Turn the Wheel to select desired speed.
Press [
ESC
] or any transport key to exit.
STOP [
STOP
]
Press once to STILL frame VTR.
TIME MODE
SELECT
[
TIME MODE
]
Press to toggle between:
Remaining time (RT)
OR
Elapsed time (ET).
