2044CL-EVS, 300 Clip Instant Access System, EVS DDRs
6
3. SYSTEM
INSTALLATION
a. SHOTBOX
1) Plug one end of a standard 9-pin, RS422 serial cable into the OUTPUT
connector on the rear of the Shotbox. Plug the other end of the cable into the
“SHOTBOX” connector on the rear of the ST400.
2) Connect the supplied POWER SUPPLY, AULT#SW300, into the POWER connector
on the rear of the SHOTBOX. Plug the Power Supply into an outlet, 90 VAC – 240
VAC.
b.
ST400-S/SM, VTR/DDR CONTROLLER
1) Plug one end of a 9-conductor, RS422 serial cable into the VTR1 (2, 3, 4, 5 or 6)
connector on the rear of the ST400. Plug the other end of the cable into the 9-pin
REMOTE connector on the Video Server.
2) Connect the supplied POWER SUPPLY, APX #4108, into the POWER connector on
the rear of the ST400. Plug the Power Supply into an outlet, 90 VAC - 240 VAC.
3) Check SETUP MENU prior to using the ST400 to confirm proper Record mode and
other User settable modes.
Video Reference must be connected for frame accurate playout of ganged channels,
and for Capture function.
Installation is complete.
CONNECTION DIAGRAM
