7
2034CL-Q, 300 Clip Instant Access System, Quantel Protocol
7.
LEARN A CLIP OR CLIP COMBINATION
a.
LEARN ON THE SHOTBOX
1)
Load a clip on the desired VTRs. (See Section 5, “
LOAD A CLIP
.”)
2) Press
[
LEARN
]. The LEARN indicator will turn on.
3)
Select the desired BANK and ShotKey.
4) Press
[
LEARN
] to exit at anytime.
NOTE:
The [
LEARN
] key toggles LEARN mode on/off.
The controller will: LEARN (save) the VTR Number (1,2,3,4), loaded CLIP ID and
current IN time to the selected Cue Point.
b.
LEARN ON THE ST300
1)
Load a clip on the desired VTRs. (See Section 5, “
LOAD A CLIP
.”)
2)
Select the desired Cue Point by pressing [
NEXT CUE
], [
LAST CUE
] or by
manually entering the Cue Point using the numeric keypad.
The selected Cue Point number is shown on the bottom line of the display.
3)
Press [
SHIFT
] + [
MARK
] to initiate the LEARN.
The display will show:
4)
Press the VTR key desired: [
1
], [
2
], [
3
], [
4
].
5) Press
[
MARK
] and the ST300 will:
LEARN (save) the VTR Number (1, 2, 3, 4), loaded CLIP ID and current
IN/OUT time to the selected Cue Point.
Press VTR:
MARK-Lrn ESC-Cancel
