16
2034CL-Q, 300 Clip Instant Access System, Quantel Protocol
17. FUNCTION
TABLE
FUNCTION
KEY PRESS
DESCRIPTION
GOTO
ENTERED
TIME
[
SHIFT
] + [
RECUE
]
Search the VTR to the manually entered time.
Use the ST300 numeric keypad.
To manually enter the desired time press [
ENTER
] or [
RECUE
].
NOTE: G
RASS
V
ALLEY
G
ROUP
Profile does
not
support TC or VITC
time search.
GANG
[
SHIFT
]+[
VTR #1
]
OR
[
SHIFT
]+[
VTR #2
]
OR
[
SHIFT
]+[
VTR #3
]
OR
[
SHIFT
]+[
VTR #4
]
Individually press the VTR keys to be included in the gang; the LED
above the key will turn on. Press the VTR key again to remove from
gang; the LED above the key will turn off. Press [
ESC
] to exit.
The VTR LEDs that are on show the gang.
The flashing LED shows which VTR is currently selected.
FFWD
[
FFWD
]
Press and HOLD to FFWD. Release key to stop. Set WIND Speed in
MENU.
JOG
[
JOG
]
Select JOG mode and enable Wheel.
LAST CUE
[
LAST CUE
]
Step to the previous Cue Point Location.
LOOP
[
LOOP ENABLE
]
Play the currently loaded clip in a continuous loop.
NEXT CUE
[
NEXT CUE
]
Step to the next Cue Point Location.
RECORD
[
REC
]
Places VTR into the Record mode selected by RECORD MODE in the
SETUP MENU. Press [
RECORD
] or [
RECORD
] + [
PLAY
].
REWIND
[
RWD
]
Press and HOLD to REWIND. Release key to stop. Set WIND Speed
in MENU.
SHUTTLE
[
SHUTTLE
]
Select SHUTTLE mode and enable Wheel.
SLOMO
[
SLOMO
] Press
[
SLOMO
] to slo-mo the VTR. Turn the Wheel (or move the T-
Bar, if available) to change the play speed.
Press [
SLOMO
] to STILL frame
OR
press any transport key to exit SLOMO.
SLO-MO
SPEED
PRESET
[
SHIFT
] + [
SLOMO
] For
WHEEL
ONLY
: Press [
SHIFT
] + [
SLOMO
] to preset the slo-mo
speed. Turn the Wheel to select desired speed.
Press [
ESC
] or any transport key to exit.
STOP
[
STOP
]
Press once to STILL frame VTR.
Press again to put VTR into STOP mode.
