6
This section demonstrates how to set up and install the BHK9000 into
a vehicle.
Installing the Control Module
The Car Kit is designed to work with either 12V or 24V vehicle supply
voltage. Refer to the following on how to install the control module in a
vehicle.
1.
Locate a suitable place inside the car to mount the control module.
Select a dry place that avoids excessive heat and mechanical
vibration. Ideally, the control module should be hidden from view, but
still be easily accessible such as under the drivers dash area.
Note: Make sure that the cables are long enough to support the
location of the control module. If the cables are not long enough, do not
lengthen the cables. Instead, relocate the control module.
2. Use two screws to fasten the control module in place.
Installation