DNA ASS1010 Instruction Manual Download Page 6

6

Safety

Alteration or modi

fi

 cations carried out without appropriate authorisation may 

invalidate the users right to operate the equipment and void warranty.
 

CAUTION

Never replace the fuse with one of greater value. Use of improper fuse 

• 

could result in overheating, smoke and could cause injury including burns.

WARNING

Do not touch ampli

fi

 er with wet hands. Risk of shock. 

• 

For traf

fi

 c safety and to maintain safe driving conditions, keep the volume 

• 

low enough so that you can hear normal traf

fi

 c sounds. 

Check the connections of the power supply and speakers regularly. If a 

• 

fuse blows solve the problem before replacing with a new fuse of the same 
rating. 
To prevent malfunction of the ampli

fi

 er and speakers, the protective 

• 

circuit will cut the power supply to the ampli

fi

 er. In such case, switch off 

the system and check all connections. Detect the cause and solve the 
problem. 
Contact your installer or dealer if you can not solve the problem. 

• 

To prevent an electric shock or short circuit during installation be sure to 

• 

disconnect the negative battery terminal beforehand. 
Con

fi

 rm that no parts are behind the panel when drilling holes for 

• 

installation of the ampli

fi

 er. Be sure to protect cables and important 

equipment such as fuel lines, brake lines and electrical wiring from 
damage. 
DO NOT allow ampli

fi

 er to come into contact with liquids. Electrical shock, 

• 

ampli

fi

 er damage and speaker damage could result. In addition, the 

ampli

fi

 er surface and of any attached speakers could become hot to touch 

and minor burns could result. 
If there is smoke or any peculiar odor present during use unplug the 

• 

power cord. 

Summary of Contents for ASS1010













Reviews: