ArtNet Multi PixxControl
5
Configuration
The configuration of the
ArtNet Multi PixxControl
happens
via a web-interface
which will be called about an arbitrary web-browser.
In the delivery condition the assigned
IP-Adresse
is
2.0.0.10
which can be used for
the web-interface and the ArtNet.
The network setting of the computer has to
set up to the
IP-Adresse 2.0.0.1
and the
Subnet mask 255.0.0.0.
Please take further details from the ArtNet-
specifications.
The
ArtNet Multi PixxControl
has 4 ArtNet nodes (A-D) which can be configured
separately.
For a better distinction you can give every node a arbitrary name.
The
Short-name
is limited to 18 marks and the
Long-name
is limited to 64 marks.
The
subnet-mask
is to leave in accordance to the ArtNet-specification 255.0.0.0 .
Please set up the
Output Settings
according to the connected LED-stripes.
The
Factory Settings
will be rebuilt with the entry of the number 7319.
SAVE
restores the configuration respectively rebuilt the Factory Settings.
Each node needs an own
IP-Address
so the assignment can occur clearly.
Use in accordance to the ArtNet-specifications the IP-Address 2.x.x.x or
10.x.x.x
Any other IP-Address can also be used e.g. 192.168.1.10 . In this case the net-
mask has to be fitted to 255.255.255.0 !
