ArtNet Multi PixxControl
13
Factory Reset
The
ArtNet Multi PixxControl
interface can be reset into the delivery conditions with
the RJ45-connection
feeler.
Proceed as follows:
-
Turn off the device
-
Push feeler and hold
-
Turn on the device
-
Yellow LED flashes
-
Release button
-
Push button again and hold
-
Green and yellow LED flash ca 10 seconds alternately
-
Meanwhile release button
-
Now, the reset will be executed and the LEDs lights up 3 times simultaneously
for confirmation
Alternatively, you can restore the factory settings via the Web browser:
-
Open the Main Settings inside the Webbrowser
-
Enter in the input field the code „7319“ for Factory Defaults
-
Klick
Save
-
Wait minimum 10 secoonds
