Wireless ArtNet-DMX 1.1
8
WiFi-Settings
The
Wireless ArtNet-DMX 1.1
can be configured as WiFi-Client or P2P-Master.
Client
If the Wireless ArtNet-DMX 1.1 is configured as Client, so the device registers itself to
an Access-Point.
Therefore the network-name must be created under
Network name (SSID).
The
Security
-Mode must be chosen and if necessary the password (
Pass phrase
) must
be entered.
In this configuration the
Security-Mode Open
,
WPA/WPA2
or
WEP
(40 or 104)
can be used.
P2P-Master
If the Wireless ArtNet-DMX 1.1 is configured as P2P-Master so a Client can register
itself directly to this per WiFi. So a direct point to point connection is possible and no
access point is needed.
For the WiFi-Connection the channel (Channel) is to assign which should be used.
In this Configuration only the Security-Mode
Open
is given, meaning an
insecure connection.
