Wireless ArtNet-DMX 1.1
7
Device configuration
For the configuration you need a USB-connection to PC with the program DMX-
Configurator.
Proceed as follows to make the device configuration:
-
Connect the Wireless ArtNet-DMX 1.1 via USB to PC
A USB-cable with MiniB-plug is needed
Install the USB-driver if it does not exist so far
-
Start the program DMX-Configurator
This is available as download by www.dmx4all.de
-
Please built a connection with the Wireless ArtNet-DMX 1.1 within the DMX-
Configurator
-
Please call up under menu
Settings Hardware Settings
-
Here the device configuration can be done
-
By clicking OK the settings are transferred and stored to the Wireless ArtNet-
DMX 1.1