User Manual
5/7
IX.AUTO PLAY
1. Use signal cable to connect output interface of Recorder and intelligent
light.
2. Power on Recorder and intelligent light.
3.
4. Press PLAY button and then press CHASE 1-8 button to select the chase
that you want to play.
5.Press +SPEED- button can change the running speed of scene when you
are playing the chase
6.Press BLACK OUT button can active/stop the blackout status.
Press MENU button to select menu “2.play mode”, press ENTER button
and then press UP/DOWN button to select one of auto mode, such as
“multi”, “cycle” and “single” mode. Press the ENTER button to enter and
press the UP/DOWN to select AUTO to trigger the chase to run.
X. MIC PLAY
1. Use signal cable to connect output interface of Recorder and intelligent light.
2. Power on Recorder and intelligent light.
3.
4.Press PLAY button, press CHASE 1-8 button to select the chase that you want
to play.
5.Use the polarity switch the back panel to select AUDIO/ MIC for microphone
pickup (Note : AUDIO interface should insert AV audio cable)
6.The sensitivity of the two kinds of pickup sources can be adjusted accord to
actual.
Press MENU button to select menu “2.play mode”, press ENTER button
and then press UP/DOWN button to select one of auto mode, such as
“multi”, “cycle” and “single” mode. Press the ENTER button to enter and
press the UP/DOWN to select MUSIC to trigger the chase to run.
1. Press MENU and ENTER button at the same time, and then re-turn on the
power switch. LCD display will show “user mode ” then will show “Play**
xxxxx”. At this moment, it has switched to user mode.
2. Press Chase 1-8 button to select the chase that you want to play.
3. If you want to come back to system mode, repeat step 1 to operate.
The LCD display will show “system mode ” for 1s and show “Play**xxxxx”.
Operation completed.
(Note: User mode can only execute the operation of play chase, stop chase
and change chase. User mode can be changed only when the menu
item function is set in system mode.)
XI.Setting User Mode
XII. Touch pane
1. Connect the output interface of touch panel and the PANEL input interface
of Recorder.
DMX RECORDER SERIES
