User Manual
4/7
VII. Menu Vocabulary
Number
Number
1
2
3
Menu
vocabulary
Menu
vocabulary
Play stopped
Select an index
Record error
4
5
6
7
Load 0.0%...100%
Starting wait…
Save 0.0%...100%
Wait 7 minutes
7.Reset—Factory data reset
Press MENU button to select menu “7. Reset”, press ENTER button to enter
it. Press UP/DOWN button to select Yes/No and press ENTER to confirm.
8
9
10
11
12
13
14
File error
No data
User mode
Play **xxxxx
System mode
Reset...wait
！
No USB
！
VIII. Record
1. Edit program with DMX console in advance.
2. Use signal cable to connect output interface of DMX console and input
interface of Recorder, then connect output interface of Recorder and
intelligent lights.
3. Power on Recorder.
4. Press RECORD button for 2s until RECORD light ON and then LCD
display will show “Select an index”
5. Switch on auto-run mode of DMX console, select the chase and adjust
the running speed & fade time.
6. Press CHASE 1-8 button to select a chase that you want to record.
Chase is recording.
7. When the chase of DMX console runs to the last step, press the selected
CHASE 1-8 button. The CHASE light OFF.
8. Continue to record other chase: Reselect the chase on the DMX console
and adjust the running speed & fade time. Press CHASE 1-8 button to
select a chase that you want to record. Chase is recording.
9. Press STOP button to exit.
10. Power off DMX console.
11. Disconnect signal cable between DMX console and Recorder.
DMX console can be removed.
.
DMX RECORDER SERIES
8.VER—The version of the unit
Press MENU button to select menu “8. Ver”, press ENTER button to check the
version of the unit.
